Use cheesecloth and other cheap items to make a life-size ghost for Halloween. Hang it on a tree or put it on your front porch so that passers-by will tremble in their boots.

Materials Needed:

  • 6-8 packages of cheesecloth
  • large foam ball
  • 2 small foam balls
  • paint roller extension pole
  • 2 yardsticks
  • hammer
  • 2 short large-headed nails
  • jug of Sta-Flo liquid starch
  • empty spray bottle
  • sheet of black felt
  • scissors
  • fabric glue
  • large sewing needle
  • spool of fishing line

Create Ghost’s Framework

Layer a paint roller extension pole and two yardsticks to create a “skeleton” for your ghost (Image 1). Use a short large-headed nail to attach both yardsticks to the paint roller extension pole, one on top of the other (Image 2).

 

Find a non-windy outdoor spot to temporarily drive the paint roller extension pole into the ground to make draping the ghost easier.

Attach Ghost’s Head

Push a large foam ball onto the top of the paint roller extension pole to create the ghost’s head.

Attach Ghost’s Hands

Attach a small foam ball to the end of each yardstick to act as the ghost’s hands.

Drape Cheesecloth

Begin draping large sheets of cheesecloth over the ghost framework (Image 1). Continue draping sheets of cheesecloth back and forth over the ghost until you’ve achieved the desired effect (Image 2).
Use a spray bottle filled with liquid starch to saturate the ghost’s head, hands and arms, leaving the body starch-free so trailing layers of gauze will blow in the breeze. Allow starch to dry (harden) completely before moving on.

Create Eyes and Mouth

Cut two eyes and a mouth out of black felt (Image 1). Use fabric glue to attach felt eyes and mouth to the ghost’s head (Image 2).
Gently remove the two small foam balls from under cheesecloth.

Attach Fishing Line to Arms

Use a large sewing needle to thread a long length of fishing line through the fabric of each hand. Triple-knot the fishing line so the ghost can move freely in the breeze without the threat of blowing away.

Attach Fishing Line to Head

Use a large sewing needle to thread a long length of fishing line through the top of the ghost’s head. It’s a good idea to drive the needle straight through the foam ball if possible. Triple knot this length of fishing line (Image 1). Finally, tie the ghost to hooks on a porch ceiling or sturdy tree branches in the yard for a spooky Halloween-themed display (Image 2).

 

For more information on how https://www.savvynana.com can help you with How to make a life-size Halloween ghost, please contact us at +1 808-372-7734, or visit us here:

Savvy Nana

38 Oak Cove Ln, Humble, TX 77346, United States

+1 808-372-7734